Description
Scotsman (also Frimont/ELBI-related) water inlet valve / solenoid, OEM part number 650105-54 (or 650105 54 / 65010554).
This is a 230 V AC water inlet solenoid valve used primarily on commercial ice machines. It controls the flow of potable water into the machine during the fill cycle. It is described as replacing earlier part 11-0568-02.
Compatible models (primary listings)
It is listed for these Scotsman and related machines (among others; always confirm against your exact model/serial and parts diagram):
- Scotsman: AC225, AC206, AC226; MC15, MC16; MV300/MV450/MV600/MV800/MV1000 series and related (MV426, MV456, MV606, MV806, MV1006, etc.); MXG328, MXG428, MXG438/MXG638.
- Simag: SC120, SD125/SD210, SV135/SV215/SV315/SV535 (and some related).
- Icematic: N131M, N201M, N301M, N401M, N501M (and close variants).
Additional cross-references from parts suppliers extend compatibility to certain Angelo Po, Barline, and other ice makers that share the same valve platform.
Key characteristics (from supplier data)
- Voltage: 230 V (typically 50/60 Hz).
- Type: Single solenoid water inlet valve (plastic body common on these units).
- Connections (typical for the family): ~3/4″ inlet, ~11–11.5 mm outlet; flow restrictor/adapter often around 2 L/min on related 650105-series valves (exact flow for the -54 can vary by application—check the original).
- Duty: Continuous-duty capable in normal ice-machine cycling.
- Weight: Approximately 90 g on closely related valves.
- Sold by ice-machine parts specialists (e.g., iceparts.com as MPN 650105 54 / product code 504580; also listed on ekuep and other catering/OEM suppliers). Pricing historically in the £25–£30 / ~$30–40 range (varies by region, stock, and whether genuine OEM).
Notes and practical considerations
- The full string in your query (“WATER I/VALVE AC225/MC15/MV/MXG438/NW – 650105-54”) is a common shorthand used by parts catalogues and service documentation to indicate the valve for those model families.
- Related but distinct part numbers exist in the 650105 / F650105 series (e.g., -00, -64, -65, -66, -74) with different flow rates, coil colours, or configurations for other Scotsman/NW/NU series machines. Do not interchange without verifying fitment.
- Common failure modes on ice machines include the valve failing to open (no water fill), sticking open (overfill/flood), or leaking. Symptoms often appear as low ice production, continuous running, or water on the floor.
- Installation is typically straightforward (isolate power and water, note orientation and hose connections, replace the solenoid assembly), but follow the machine’s service manual for torque, sealant, and electrical connections. Use only potable-water-rated replacements.
- Genuine Scotsman/OEM preferred for reliability and correct flow characteristics; aftermarket equivalents exist but quality varies.





















Reviews
There are no reviews yet.