- Internal control: The main control component is the PC Board:
These manage the ice-making cycle, sensors (ice full, water low, condenser temperature, hall sensor), valves, fan, and turning motor. Faults or control issues are typically addressed by replacing the relevant PC board or sensors, not a separate timer.
- External timers for scheduling: Metraclark sells general-purpose timers under their Refrigeration & HVAC controls range. These are commonly used to switch power to equipment (including ice machines) on a schedule — for example, to limit runtime, reduce energy use, prevent over-production, or match peak demand periods.
Available Metraclark Timers Suitable for Ice Machine Use
Here are the main options currently listed:
| Model | Type | Key Features | Typical Use with Ice Machines | Link / Code |
|---|---|---|---|---|
| MTD4 | 24-hour analogue | DIN-rail mount, 96 pins (15-min steps), 16A resistive / 4A inductive, 200-hour battery backup, NO/NC contacts, manual override | Simple daily on/off scheduling of the whole machine | MAJ0068 |
| MTD8 | Digital industrial | 8 on/off programs | More flexible multi-period daily scheduling | MAJ0072 |
| Microrex T11 | 24-hour programmable | 16A, 15-minute minimum intervals | Precise daily scheduling | RXD1014 |
| Microrex T31 | 24-hour programmable | 16A, 30-minute minimum intervals | Similar to T11, slightly coarser steps | RXD1011 / RXD1009 |
| Paragon 9145 | Universal defrost timer | Multi-voltage (120/208-240V), real-time clock, 100-hour power-loss protection, in enclosure | Primarily for defrost control in refrigeration systems; less common as a pure on/off scheduler for cube ice makers | RXD1411 |
MTD4 is the most straightforward and commonly recommended for basic timed control of appliances such as ice machines, geysers, or pumps. It is DIN-rail mountable, has battery backup so it keeps time during power cuts, and can handle typical ice-machine loads.
Practical Considerations
- Why use an external timer? Commercial ice machines are often left on continuously. A timer lets you restrict operation to specific hours (e.g., overnight fill for morning demand), reduce electricity costs, and limit ice clumping in the bin.
- Installation notes: The timer is wired in the supply circuit to the ice machine (or via a contactor for higher loads). Ensure the timer’s current rating is adequate for the machine’s starting and running current. The ice machine’s own safety features (ice-full sensor, water-low, compressor protection) still operate when power is supplied.
- Not a substitute for the PC board: If the machine is not cycling correctly, producing error lights (FAULT, WATER LOW, ICE FULL), or has intermittent operation, the issue is more likely the PC board, sensors, or water/valve components than a missing timer.
- Defrost vs. on/off: The Paragon 9145 is designed for timed defrost cycles in refrigeration evaporators. Standard Metraclark cube ice machines (IM series) use electronic control and do not typically rely on a separate mechanical defrost timer of this type.
Recommendations
- Confirm the exact model of your Metraclark ice machine (e.g., IM-25, IM-50, IM-100) and whether you need a replacement control board or an external scheduler.
- For external timed control → start with the MTD4 analogue timer (simple, reliable, battery backup).
- For more complex multi-period schedules → look at the MTD8 or Microrex digital models.

