loading...
CM33210019 is a Scotsman (and related brands such as Simag/Icematic) magnetic reed switch used in commercial ice machines.

CM33210019 is a Scotsman (and related brands such as Simag/Icematic) magnetic reed switch used in commercial ice machines.

1 minute, 36 seconds Read
0
(0)

CM33210019 is a Scotsman (and related brands such as Simag/Icematic) magnetic reed switch used in commercial ice machines.

It is a small, sealed magnetic (reed) sensor/switch that detects the position or movement of a plastic curtain/deflector in front of the evaporator. When ice drops during harvest, the curtain swings and the magnet actuates the switch. This signals the control board to end the harvest/defrost cycle and return to freezing, or to shut the machine down if the bin is full (curtain held open).

Key details and equivalents

  • Primary part number: CM33210019 (also seen as CM 33210019 or FCM33210019).
  • Closely related / superseding part: CM33210018 (and FCM33210018). Multiple suppliers list CM33210018 and CM33210019 as interchangeable or sequential versions of the same reed switch. The older FCM33210018 is noted as obsolete in favor of FCM33210019 on some parts sites.
  • Function: Magnetic reed switch (typically normally open). Used for ice-full detection and harvest-cycle reset on the evaporator curtain/deflector.
  • Typical electrical ratings (from the closely related CM33210018 listings): 250 V, 0.5 A; contact type NO.
  • Physical characteristics (approximate, from CM33210018 equivalents): Body roughly 32 mm × 13 mm × 8 mm; mounting holes ~20 mm apart; cable length often around 750 mm.

Compatible models

Primarily associated with Scotsman MV-series cube ice machines, including:

  • MV300, MV450, MV600, MV800, MV1000 (and related variants).

Also cross-referenced for:

  • Simag (e.g., SV315 and similar)
  • Icematic (e.g., N301M and related)
  • Other equipment sharing the same sensor platform (certain blast chillers, etc., via OEM cross-references such as 33210018/33210019 under various brands).

One supplier explicitly lists it as the magnetic switch for the Scotsman MV 600.

Common symptoms of failure

  • Machine stays in harvest or does not restart freezing after ice drop.
  • Bin-full shutdown occurs incorrectly (or fails to occur).
  • Intermittent operation, no response when the curtain moves, or safety lockout / no-start conditions.
  • Visible damage, broken wires, or loss of magnetic sensing (can be tested with a multimeter for continuity change when a magnet is brought near the switch).

Rate this item

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!

Rate this item

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!

Similar Posts

Leave a Reply